The IP67 USB3.0 series is the new member to CONEC IP67 series connector family.
USB 3.0 provides data transfer rates 10 times faster than USB 2.0. The bayonet locking design allows a fast, simple and robust IP67 protected connection and ensures protection against environmental influences in rough conditions.
The new USB 3.0 Type A is plug compatible to USB 2.0 Type A. Meaning, the Type A USB 3.0 connectors and sockets do fully accept all Type A connectors from the former generations. USB 3.0 Type B and Type Micro-B sockets are suitable to accept USB 2.0 Type B and Type Micro-B connectors, but vice versa those connections cannot be mated together.
A further improvement of USB 3.0 is the increased maximum unit load. USB 3.0 supports up to six devices with up to 150 mA load per device, i.e, a total load of 900 mA.
The IP67 USB3.0 connector series is available in plastic and metallized plastic. The Type A / Type A panel mounted receptacles are suitable for front and rear panel mounting. The cable connector accepts cable diameter between 4.0 mm and 6.0 mm. Besides the single connector the following cable assemblies are available in different lengths:
- IP67 USB Type A to IP67 USB Type A
- IP67 Type A Plug to USB 3.0 Type A overmolded (IP20)
- IP67 Type A Plug to USB 3.0 Type B overmolded (IP20)
- IP67 Type A Plug to USB 3.0 Type Micro-B overmolded (IP20)